Pto; Rear Pto - Zetor COMPAX CL Series Operator's Manual

PTO

Both rear and mid PTOs allow variable utilization.
At the same time, they can be engaged either simultaneously or independently on each other.
The engine cannot be started when the PTO switch is in the ON position.
The engine stops when the driver leaves the seat with the parking brake released and the PTO on.
Warning: To prevent damage to the transmission and the working equipment, do not turn on
the PTO when the engine is running at high speed.

Rear PTO

1 - Rear
2 - Mid + rear
3 - Mid
The tractor has a single-speed PTO (540 rpm). Use the
PTO lever to switch it on.
The PTO switch must be in the OFF position before
switching the PTO on.
1. Reduce engine speed almost to idle.
2. Make sure the PTO switch is in the OFF position.
3. Use the PTO lever to turn on the rear PTO.
4. Switch on the PTO switch.
5. Increase the engine speed to the desired speed.
Engine speed
2,2893 rpm
3,000 rpm
CONTROLS, INSTRUMENTS & OPERATIONS
REAR PTO Speed
540 rpm
560 rpm
51