Tachometer; Hour Meter; Fuel Gauge And Water Temperature Gauge; Hazard Warning Signal Switch - Zetor UTILIX CL Operator's Manual

Tachometer

This meter shows the revolutions of the engine and the
PTO shafts as well as the travel speed in top gear.

Hour meter

The hour meter consists of digits with the last digit
indicating 1/10th of an hour.

Fuel gauge and water temperature gauge

Fuel gauge
Shows the amount of fuel in the tank when the ignition
switch is ON.
Water temperature gauge
Shows the water temperature with the ignition switch ON.
C is low to normal temperature.
H is high temperature.
If the pointer is in the red H segment the engine is
overheating.
Refer this book to rectify the problem.

Hazard warning signal switch

Push the hazard warning signal once to operate the
hazard warning light. (Left and right turn indicators flash).
Push the hazard warning light switch again to switch off
the hazard warning lights.
1 - Hazard warning signal S/W
CONTROLS, INSTRUMENTS & OPERATIONS
43
U18N014
UCL18N013
UCL18N014
UCL18N015