Practice Safe Maintenance; Avoid High-Pressure Fluids; Prevent Battery Explosions - Zetor COMPAX CL Series Operator's Manual

Hide thumbs Also See for COMPAX CL Series:
Table of Contents

Advertisement

Practice safe maintenance

Be thoroughly familiar with the service procedure before
performing work.
Keep the tractor area clean and dry.
Do not attempt to service the tractor while it is in motion.
Be careful not to let your body or clothing get into the
rotating shaft.
Always lower all attached equipment on the ground. Turn
off the engine.
Remove the ignition key. Let the tractor cool down before
any repairs.
All parts of the tractor that need to be lifted for service
work must be securely supported.
Keep all parts in good conditions and properly installed.
Replace worn or damaged parts. Replace
damaged/missing plates.
Remove any accumulated excess grease or oil from the
tractor.
Disconnect the battery ground cable (-) before making
adjustments to electrical systems or performing welding
work on the tractor.

Avoid high-pressure fluids

Liquid escaping under pressure can penetrate the skin
and cause serious injury. Be especially careful when
handling the injection elements - there is a risk of injecting
liquids under high pressure under the skin of your hands
or other parts of your body. If ANY liquid penetrates the
skin, contact your doctor immediately.

Prevent battery explosions

Keep sparks, lighted matches, and open flame away from
the top of battery. Battery gas can explode. Never check
battery charge by placing a metal object across the poles.
20
SAFETY INSTRUCTIONS, DO'S & DON'TS
U18N143
U18N144
U18N145

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Compax cl 25 nc

Table of Contents