Main Switch (Key Switch); Headlights Switch (Beacon Light), Turn Signal Lights Switch And Horn Switch - Zetor COMPAX CL Series Operator's Manual

Main Switch (Key Switch)

1 - GLOW - Preheating of combustion chamber.
2 - OFF - The key can be inserted or removed.
3 - ON - The electrical circuit is closed.
4 - START - The starter is on. When released, the key
returns to the ON position.

Headlights Switch (Beacon Light), Turn Signal Lights Switch and Horn Switch

Headlights Switch (if Beacon Light is installed, also Beacon Light Switch)

High beam and low beam lights are controlled by the lever (5) on the main switch
Position 1: Low Beam Lights (Beacon Light)
Position 2: High Beam Lights (Beacon Light)
Turn Signal Light Switch

Press the turn signal lever (1) down to signal a left turn.
Press the turn signal lever (1) up to signal a right turn.
Horn

Press the red button (2).
1 - Turn Signal Light Switch
2 - Horn
3 - Position 1 - Low Beam Lights
4 - Position 2 - High Beam Lights
5 - Headlight Switch
40
CONTROLS, INSTRUMENTS & OPERATIONS