Fuel
Use clean diesel fuel only, EN 590.
IMPORTANT: The diesel fuel system is susceptible to dirt and water, so minimize the risk of
system contamination.
Fuel System Bleeding
1. Fuel filter tap in ON position
2. Open the tap on the fuel injection pump.
3. Fill the tank with fuel and turn the ignition on.
4. Start the engine and let it run for a while.
5. Close the fuel injection pump tap.
6. Bleeding of the system is now complete.
1 - Fuel System Bleeding
2 - Fuel Filter Tap
Fuel Filter Cleaning
1. Close the fuel tap.
2. Remove the fuel filter element.
3. Clean the fuel filter element in clean diesel. Replace, if necessary
4. Install the cleaned element or a new filter element.
5. Open the fuel tap.
6. Bleed the fuel system.
1 - Fuel Filter Cleaning
2 - Fuel Filter Element
MAINTENANCE INSTRUCTIONS
77