Maintenance And Adjustment Schedule; Periodical Check And Service Table - Zetor COMPAX CL Series Operator's Manual

Maintenance and Adjustment Schedule

Service inspections
Service inspections are performed as follows:
The first service inspection at the state of the engine hour counter of 50 EH maximum, but not later than
6 months after commissioning of the tractor.
The second service inspection after covering another 450 EH (at the state of the engine hour counter of 500
EH maximum) but not later than 12 months after the first service inspection.
Next service inspections always after covering another 500 EH but not later than 12 months after the
previous service inspection.
The service inspections are a part of tractor maintenance.
The services authorized by Zetor will provide professional performance of service inspections according to
the manufacturer's instructions.

Periodical Check and Service Table

Caution: These intervals are for operation under normal conditions and need to be reviewed
under severe conditions to a greater frequency.
O Check, top-up or adjust,
X Replace,
XX First replacement
Item Daily
Engine oil and O
element
Air filter
Refrigerant in the O
radiator
Fuel O
Fuel filter O
Fan belt O
Battery
Loose nuts and O
screws
Radiator hose O
clamps
Transmission oil
and element
Clutch pedal free O
play
Condition of both O
brakes pedals
MAINTENANCE INSTRUCTIONS
Service interval (hour meter, mark)
50 100 250
xx
O
O
xx O
500 750 1000
x x
x
x x
x O x
1 year 2 years
x
Check every 100
EH
x
x
73