Mid Pto - Zetor COMPAX CL Series Operator's Manual

Mid PTO

The mid PTO speed is 2,000 rpm. Use the PTO lever to switch it on. The PTO switch must be in the OFF
position before switching the PTO on.
1. Reduce engine speed almost to idle.
2. Make sure the PTO switch is in the OFF position.
3. Use the PTO lever to turn on the mid PTO.
4. If the rear PTO needs to be engaged, move the PTO lever to the relevant position.
5. Switch on the PTO switch.
6. Increase the engine speed to the desired speed.
1 - Rear
2 - Mid + rear
3 - Mid
Engine rpm Mid PTO Speed
2,875 2,000 rpm
3,000 2,087 rpm
Important: If the driver turns off the PTO switch, both the rear PTO and the mid PTO turn off
immediately.
Warning: Do not operate any implement at higher speeds than specified. Stop the engine when
adjusting the implement to avoid serious injury. When leaving the tractor, stop the engine, remove
the ignition key and apply the parking brake.
52
CONTROLS, INSTRUMENTS & OPERATIONS