GM2810A
Handling Instructions
Fuel Filter
Inspection of Fuel Filter
The fuel filter is positioned between the fuel
strainer and the engine, and cleans the fuel
flowing into the carburetor.
When the fuel flow becomes insufficient,
replace the fuel filter if necessary.
1.
Make sure that there is no fuel leakage.
2.
Make sure that the fuel filter is not damaged
or dirty.
Oil Leakage
Inspection of Oil Leakage
Caution
When performing maintenance on the
hydraulic system, lower the mower decks.
After approximately 50 hours of operation,
some tightened portions may be loosened
and oil and grease may leak.
Be sure to retighten the parts.
Check the bottom of the machine for oil and
grease leakage.
Page 4-12
Inspections