Displayed Icon; Main Menu Items - Baroness GM2810A Owner's Operating Manual

GM2810A
Handling Instructions

Displayed Icon

The icon appears at the top of the monitor
display.
3
2241 RPM
ENG RPM
79 C
COOL TEMP
Displayed Icon_001
1
2
3
4
1. Regeneration icon
The regeneration icon appears with DPF
regeneration request or during DPF
regeneration.
DPF regeneration request: Blinking
･
During DPF regeneration: Lighting
･
2. Auto regeneration inhibit icon
The auto regeneration inhibit icon lights up
when the DPF auto regeneration inhibit
switch is set to the "Auto regeneration inhibit
mode".
3. High exhaust temperature icon
The high exhaust temperature icon lights up
when the exhaust temperature reaches 450
°C during DPF regeneration.
4. Warning mark
The warning mark continues to be displayed
in the upper right corner of the monitor
display if the warning message ignored and
the Enter key pressed to hide the message.
Service reminders
･
･ Low fuel level
･ Fault codes
Page 4-36
2
1 4
100 %
% SOOT
38 %
FUEL LEVEL
Regeneration icon
Auto regeneration inhibit icon
High exhaust temperature icon
Warning mark

Main Menu Items

While any parameter is displayed, press the
menu key to display the main menu with the
following 11 items.
･ GO TO 1-UP DISPLAY / GO TO 4-UP
DISPLAY
･ LANGUAGES
STORED CODES
･
ENGINE CONFIGURATION
･
SETUP 1-UP DISPLAY
･
SETUP 4-UP DISPLAY
･
SERVICE REMINDERS
･
f9i14s-006
SELECT UNITS
･
ADJUST BACKLIGHT
･
ADJUST CONTRAST
･
UTILITIES
･
1
1-Up Display / 4-Up Display
"GO TO 1-UP DISPLAY" / "GO TO 4-UP
DISPLAY" are used to set whether to display
parameters individually in a screen or in
groups of four per screen.
1. 1-up display
One parameter is displayed individually in
the monitor display.
GO TO 1-UP DISPLAY
LANGUAGES
STORED CODES
ENGINE CONFIGURATION
SETUP 1-UP DISPLAY
SETUP 4-UP DISPLAY
SERVICE REMINDERS
Main Menu Items_001
1 Menu key
ENG RPM COOL TEMP
1-Up Display / 4-Up Display_001
xqkh6l-002
dyeeib-003
Instruments