Knife Rotation Switch; 2Wd/4Wd Selector Switch - Baroness GM2810A Owner's Operating Manual

GM2810A
Handling Instructions

Knife Rotation Switch

Caution
Set the knife rotation switch to the "Rotation"
position immediately before starting cutting
work. At all other times, be sure to leave the
knife rotation switch set to the "Stop" position.
The knife rotation switch is located in the
operation panel and operates rotation of the
rotary knives of the mower decks.
When the knife rotation switch is set to the
"Rotation" position, the rotary knives of all
mower decks will rotate.
When the knife rotation switch is set to the
"Stop" position, the rotary knives will stop.
Note:
When the mower decks are raised, the rotary
knives do not rotate, even if the switch is set to
the "Rotation" position.
1
Knife Rotation Switch_001
1
A
B
Page 4-28
A
B
mh4pyw-015
Knife rotation switch
Rotation
Stop

2WD/4WD Selector Switch

Caution
When working on a slope, be sure to use the
machine in 4WD.
Caution
When traveling, be sure to stop the rotation of
the rotary knives and raise the mower decks.
The 2WD/4WD selector switch is located in the
operation panel.
When the switch is set to the "2WD" position,
the machine will be in two-wheel drive (front-
wheel drive). When it is set to the "4WD"
position, the machine will be in four-wheel
drive.
Note:
When the knife rotation switch is set to the
"Rotation" position, the machine enters 4WD,
regardless of the position that the 2WD/4WD
selector switch is set to.
2WD/4WD Selector Switch_001
1
A
B
A
B
nyxhh2-004
2WD/4WD selector switch
4WD
2WD
Operation Method
1