Maintenance Work; Cleaning Of Mower Deck; Change Of Rotary Knife - Baroness GM2810A Owner's Operating Manual

7. Traveling pedal shaft fulcrum
There are two locations.
Greasing Points_014
8. Foot brake
There are three locations.
Greasing Points_015

Maintenance Work

Maintenance Work

Cleaning of Mower Deck

Be sure to clean the mower deck after use.
1. Stop the engine, and then remove the key.
2. Carefully clean the front and back of the
mower deck with water or compressed air.
3. Remove any grass wrapped around the
rotary knife.

Change of Rotary Knife

8bq62b-036
Caution
The rotary knife is an edged tool.
Take extra care in handling since they could
cut your hands or legs.
Caution
If the rotary knife becomes worn or damaged,
a crack or tear between the sail and flat part
will result.
Take extra care since a broken piece of the
rotary knife may fly off while it is rotating.
8bq62b-037
Caution
When touching edged tools, wear gloves,
since they could cut your hands.
Important
The rotary knife has a specific installation
direction.
Do not install it facing the wrong direction.
Maintenance
1
2
Change of Rotary Knife_001
1 Rotary knife top side
2 Rotary knife bottom side
GM2810A
2tn594-005
Page 5-23