Travel Of Machine - Baroness GM2810A Owner's Operating Manual

Travel of Machine

Moving The Machine
Caution
Under any circumstances drive the machine at
such a speed that you can stop it immediately
for emergencies.
Caution
When traveling, be sure to stop the rotary
knives and raise the mower decks.
1. Start the engine.
"Procedure to Start Engine" (Page 4-21)
2. Raise all mower decks, and then engage the
mower lock levers (latches) for mower decks
#4 and #5.
3. Depress the brake pedal to release the
parking brake.
4. Slowly depress the traveling pedal.
5. The machine starts traveling.
Towing The Machine
If the machine does not travel due to engine
trouble, etc., you can move it by towing it.
Caution
Before towing, check that the brake is applied
effectively.
Caution
Before starting the engine, be sure to close
the unload valves.
Important
Do not touch the unload valve except when
towing the machine.
Important
When towing the machine, travel at a speed
no more than 3.0 km/h.
In addition, do not tow the machine for more
than 3 minutes.
If the towing speed is too fast or there is
excessive movement, the pump or motor will
be damaged.
Travel of Machine
Handling Instructions
1. Stop the engine.
"Procedure to Stop Engine" (Page 4-22)
2. Apply the parking brake.
3. Chock the wheels.
4. Secure the machine with ropes.
Front left side
Towing The Machine_001
Front right side
Towing The Machine_002
Rear side
Towing The Machine_003
5. Set the 2WD/4WD selector switch to the
"2WD" position.
6. Make sure that the steering wheel is raised
completely, and then bring the seat to the
backmost position.
GM2810A
gay3t1-024
gay3t1-025
gay3t1-026
Page 4-71