Brake Pedal - Baroness GM2810A Owner's Operating Manual

Brake Pedal

Warning
Link the brake pedals, except when operating
the machine.
Using the brake pedals without linking them
may result in the machine overturning.
Important
When depressing the brake pedals to make
turns with a small radius, obtain a sufficient
awareness of the lawn and ground conditions.
This may damage the lawn.
The brake pedals are located in the left foot
area and operate the left and right brakes
independently.
By depressing the brake pedal on the side in
which the turn will be made, the machine can
make turns with a small radius.
If the front wheel on the upward side of a slope
slips, depress the brake pedal for the wheel on
the upward side in order to increase the
traction of the wheel on the downward side and
stabilize travel.
1
Brake Pedal_001
1 Brake pedals
2 Parking brake lever
Operation Method
Change of Braking Method
Follow the procedure below to change the
braking method from linked to independent.
1. Swing up the pedal link bar, and then pull it
out from the right brake pedal.
2. Secure the pedal link bar in the holder on
the left brake pedal.
2
wd1fww-001
Handling Instructions
1
A
Change of Braking Method_001
1 Pedal link bar
A Swing up
B Pull out
1
A
Change of Braking Method_002
1 Holder
A Secure
GM2810A
B
ukjawr-003
ukjawr-004
Page 4-33