Table of Contents
Advertisement
System Information and Configuration
Configuring a Live Video Connection
About Live Video/
Live Video
Video Connections
When video connections are configured, you can adjust the screen to display a video view
in any navigation view (see page 124).
Before You Begin
Connect the cable between the video source and the navigation system, following the in-
structions in the relevant BrainLAB System User Guide and the user manual for the video
source. Make sure that you have a signal in order to adjust the video settings.
How to Configure a
Live Video View
Steps
52
allows you to configure the settings for a real-time endoscope video connection.
a
1.
Press
in the
Live Video
2.
In the
Video Source
NOTE: Composite is the standard BrainLAB connector.
3.
In the
Image Settings
er bars.
NOTE: Video image settings are described on page 53.
4.
Press
Accept
to confirm settings.
Figure 12
dialog.
Tools
tab a select signal type (
tab s, adjust image view settings as needed using the slid-
Software User Guide Rev. 1.0 Kolibri cranial/ENT Ver. 2.7
s
PAL
or
NTSC
).
Advertisement
Table of Contents
