Table of Contents
Advertisement
Trajectories
Trajectories
Acquiring Trajectories
Overview
The
quired, for example, in order to use the
How to Create a
Trajectory
Steps
How to Create a
You can also use
Target Point Only
case, you do not set a tool tip offset.
Steps
164
Acquire
button allows you to create a trajectory in the image set. A trajectory is re-
1.
Set a tool tip offset (see page 161). The end of the offset will represent the target
point once a trajectory is set.
2.
Place the instrument tip on the desired entry point on the patient's anatomy.
3.
Press the
Acquire
button to create the trajectory.
4.
In the
Tool > Intraop. Trajectory
trajectory as required (see page 165).
Acquire
to create a target point without a corresponding trajectory. In this
1.
Make sure that no tool tip offset is set.
2.
Place the instrument tip on the desired point on the patient's anatomy.
3.
Press the
Acquire
button to create the point.
4.
In the
Tool > Intraop. Trajectory
red cross-hair.
You can now modify the point using the same options available for modifying
trajectories (see page 165).
Figure 72
Auto Pilot
view.
dialog which opens, you can now modify the
dialog which opens, the point is displayed as a
Software User Guide Rev. 1.0 Kolibri cranial/ENT Ver. 2.7
Advertisement
Table of Contents
