Adjusting The Threshold Of 3D Images - Brainlab Kolibri cranial Software User's Manual

Configuring Views

Adjusting the Threshold of 3D Images

Overview If you assigned
press the eye icon.
In this tab, you can optimize the display of the skin or bone surface by adjusting the thresh-
old.
How to Adjust
Threshold
Steps
1.
2.
3.
4.
Additional Options
Options
To optimize values for MR or CT, press
To restore settings to those stored the last time you left this dialog, press
Software User Guide Rev. 1.0 Kolibri cranial/ENT Ver. 2.7
3D Overview to the upper left view, the
Press the eye icon and select the
Use the slider bar to adjust values so that skin or bone surface can be clearly seen.
• Reduce unwanted information in the image set by increasing the threshold.
• The image data taken into account is shown in color.
Use the up/down arrows to scroll through the slices to check the settings.
Press . The software recalculates the three dimensional reconstruction in
Close
the view.
Threshold tab is available when you
Figure 44
Threshold tab.
.
Auto
Reset .
123