General Navigation Functions
Tooltip Offset
Setting a Tool Tip Offset
Overview
The
ment. This function is useful for:
• Reviewing anatomy at deeper depths
• Planning instrument trajectories
How to Set an
Offset
Steps
1.
2.
3.
4.
Software User Guide Rev. 1.0 Kolibri cranial/ENT Ver. 2.7
Tooltip
button allows you to virtually lengthen or retract the tip of the navigated instru-
Press
Offset
in the menu bar. The
To extend or retract the instrument, select the required value on the scale.
Use
-/+
buttons to fine-tune the value in 1 mm increments.
NOTE: Pressing Reset sets the offset back to 0 mm and closes the dialog.
Press
Close
to apply values and return to the navigation screen. The actual offset
is shown above the
Tooltip
Figure 69
Figure 70
Tool Tip Offset
dialog opens.
buttons.
161