Calibrating Instruments
Calibration and Verification Using the V-Inset (Notch)
Overview
With notch calibration, you can verify the tip and axis of instruments that were not suitable
for calibration using the receptacles (e.g., due to a large diameter).
To calibrate the tip and the axis, calibration is performed in two steps:
• The tip is calibrated in the pivot points
• The axis is calibrated in the V-inset
The Calibration and
Verification Dialogs
Software User Guide Rev. 1.0 Kolibri cranial/ENT Ver. 2.7
a
d
Figure 58
s
f
145