Table of Contents
Advertisement
Accessing Calibration
Accessing Calibration
Introduction
Options
You can access calibration by:
• Holding the instrument and ICM (if you are calibrating using the ICM) in the camera
• Holding the instrument in the camera field of view, ensuring that the reference array is
• Opening the
Before You Begin
Make sure that only the instrument to be calibrated is in the camera field of view.
134
field of view
also visible (if you are calibrating using the reference array)
Tools > Tool Calibration/Verification
menu bar (see page 135)
Carefully read the following sections in the
- Reference Arrays
- Instrument Adapter Kit, StarLink Interface
- Skull Reference Set
-
Reference Headband
- ICM4
- ICM 2.0
Instrument User Guide
and
Reference Headband Array
Software User Guide Rev. 1.0 Kolibri cranial/ENT Ver. 2.7
dialog via the
Tools
button in the
:
Advertisement
Table of Contents
