Initializing The Microscope; Activating And Selecting The Microscope - Brainlab Kolibri cranial Software User's Manual

Microscope Navigation

Initializing the Microscope

Activating and Selecting the Microscope

How to Activate the
Microscope
Steps
1
2.
3.
Software User Guide Rev. 1.0 Kolibri cranial/ENT Ver. 2.7
Open Tools > Microscope
In
Tools > Microscope > Model
croscope model.
NOTE: If only one microscope is configured, this dialog is skipped.
In the Microscope Detection
uration to be used.
The microscope is now initialized and the
dialog is displayed.
Figure 89
and press Connect Microscope
, select the button that corresponds to your mi-
dialog, select the button for the microscope config-
Microscope Calibration Verification
.
205