Accessing Calibration
Loading Precalibrated Geometries and Restoring a Calibration
Loading
Some instruments are precalibrated. When held in the camera field of view, the software
Precalibrated
recognizes that a precalibration is available for the instrument.
Geometries
Steps
136
a
1.
To load a precalibration, press the button a in the
log.
NOTE: If only one precalibrated instrument is available, then the button is named
accordingly, e.g., Eraser . If more than one precalibrated instrument is available,
the button is named Load , and you must select the required instrument in a sepa-
rate dialog.
2.
Verify the calibration in the verification dialog that opens.
Figure 50
Instrument Calibration
Software User Guide Rev. 1.0 Kolibri cranial/ENT Ver. 2.7
dia-