Table of Contents
Advertisement
Surface Matching Registration
Softouch Registration
Performing Softouch Registration
Before You Begin
• Do not use the
Guidelines for Point
Acquisition
• Generally, all (bony) structures with a surface which does not generally change during
anaesthesia are appropriate for point acquisition.
• To ensure optimum accuracy, acquire points on both sides of the patient's face.
How to Perform
Registration
Steps
1.
2.
3.
4.
5.
Software User Guide Rev. 1.0 Kolibri cranial/ENT Ver. 2.7
Carefully read the
Softouch
on soft tissue that may shift position (e.g., loose skin).
Softouch
Press
Softouch
in the
Patient Registration
NOTE: When the Patient Registration dialog is open, you can also activate
Softouch registration by holding the Softouch in the camera field of view.
Gently touch a point on the patient with the
still.
Acquisition of the point is indicated by a "beep" and a progress bar.
When a sufficient number of points is acquired,
Press
Proceed
to start the surface matching calculation. The calculation may
take a few moments.
Verify registration accuracy in the dialog that opens (see page 91).
chapter in the
Instrument User Guide
dialog.
Softouch
tip and hold the instrument
is enabled.
Proceed
.
85
Advertisement
Table of Contents
