Agilent Technologies ESA-E Series User And Programming Manual page 101

3Pi/8 Rotation Allows you to specify whether or not rotation is applied to the IQ constellation
diagram. This softkey is only valid for the EDGE (8PSK) modulation format.
On
Off
Restore Meas
Sets up the instrument parameters for the measurement using the factory default
Defaults
instrument settings. (This only affects measurement parameters for this
measurement and does not affect any mode parameters.) If you have made any
manual changes to the measurement parameters, restoring the measurement
defaults will ensure valid measurements.
Advanced Accesses advanced function menus allowing you to adjust Max Mixer Lvl for
Error Vector Magnitude measurement.
Max Mixer Lvl
Chapter 6
Applies rotation to the constellation diagram, thus displaying 16
symbol points
Does not apply rotation to the constellation diagram, thus
displaying only 8 symbol points
Allows you to set the maximum power level at the input of the
mixer for the measurement. The instrument uses this value to
automatically set the required input attenuation to maintain the
mixer input power below this level.
Front-Panel Key Reference
Meas Setup
87