Calibrate Subsystem; Radio Standard Calibration - Abort; Radio Standard Calibration - Continue; Radio Standard Calibration - Start - Agilent Technologies ESA-E Series User And Programming Manual

CALibrate Subsystem

These commands control the self-alignment and self-diagnostic
processes.

Radio Standard Calibration - Abort

:CALibration:WIDeband:ABORt
Abort the instrument calibration.
Front Panel
Access:
Det/Demod, More, Wideband Cal

Radio Standard Calibration - Continue

:CALibration:WIDeband:CONTinue
Perform the instrument calibration. This command can only be used
after issuing the :CALibration:WIDeband[:NOW] command (below).
Front Panel
Access:
Det/Demod, More, Wideband Cal

Radio Standard Calibration - Start

:CALibration:WIDeband:[:NOW]
Start instrument calibration. The CALibration:WIDeband:CONTinue
command is required to complete the calibration.
Front Panel
Access:
Det/Demod, More
Chapter 7
Programming Language Reference
CALibrate Subsystem
99