Agilent Technologies ESA-E Series User And Programming Manual page 146

Programming Language Reference
SENSe Subsystem
Factory Preset
and *RST: Exponential
Remarks: You must be in the Modulation Analysis mode to use
this command. Use INSTrument:SELect to set the
mode.
Front Panel
Access:
Meas Setup
Monitor Spectrum—Resolution Bandwidth
[:SENSe]:MONitor:CHANnel:BWIDth|BANDwidth[:RESolution]
<freq>
[:SENSe]:MONitor:CHANnel:BWIDth|BANDwidth[:RESolution]?
Set the value of the resolution bandwidth.
Factory Preset
and *RST: 30 kHz
Range: 1 kHz to 5 MHz
Front Panel
Access:
Meas Setup
Monitor Spectrum—Video Bandwidth
[:SENSe]:MONitor:CHANnel:BWIDth|BANDwidth:VIDeo <freq>
[:SENSe]:MONitor:CHANnel:BWIDth|BANDwidth:VIDeo?
Set the value of the video bandwidth.
Factory Preset
and *RST: 30 kHz
Range: 30 Hz to 3 MHz
Front Panel
Access:
Meas Setup
Monitor Spectrum—Maximum Hold Trace State
[:SENSe]:MONitor:CHANnel:MAXHold[:STATe] ON|OFF|1|0
[:SENSe]:MONitor:CHANnel:MAXHold[:STATe]?
Turn maximum hold trace feature on or off.
132
,
Chan Setup
,
Chan Setup
Chapter 7