Front-Panel Key Reference
MEASURE
MEASURE
Accesses menu keys that allow you to make Monitor Spectrum and EVM
measurements.
Monitor
Display the frequency-domain spectrum of the transmit or receive channel for the
Spectrum
selected device (mobile or base station). The channel presets are standard specific.
EVM
Error Vector Magnitude (EVM) displays the I/Q Measured Polar Vector trace of
your current signal, and also displays numeric results for the following
measurements:
EVM (rms)
EVM (peak)
Mag Error (rms) Maximum and average RMS Magnitude Error measured in
Mag Error
(peak)
Phase Error
(rms)
Phase Error
(peak)
Freq Error
I/Q Offset
Droop Error
(per symbol)
88
Maximum and average RMS Error Vector Magnitude measured
in percent.
Maximum and average peak EVM measured in percent.
percent.
Maximum and average peak Magnitude Error measured in
percent. You must press the Zoom key on the front panel to see
this measurement.
Maximum and average RMS Phase Error measured in degrees.
Maximum and average peak Phase Error measured in degrees.
You must press the Zoom key on the front panel to see this
measurement.
Maximum and average frequency error measured in Hz.
Maximum and average I/Q Offset measured in dBc.
Maximum and average amplitude Droop Error measured in dB.
Chapter 6