Mount The Center Rack Sensor; Square Tube Center Rack; Round Tube Center Rack - Raven AutoBoom Installation Manual

Mount the Center Rack Sensor

Square Tube Center Rack

Center Sensor Installed
FIGURE 3.
Mount the center sensor (P/N 063-0130-018) to the machine's center rack using two 1-1/8" W x 2" L x 3/8"
1.
thread U-bolts (P/N 107-0171-613) and four 3/8"-16 zinc flanged lock nuts (P/N 312-1001-164).
Tighten the nuts to ensure the sensor is mounted securely.
2.

Round Tube Center Rack

Center Sensor Installed
FIGURE 4.
Remove the nuts and clamp from the 2" muffler clamps (P/N 435-3003-059) and install the U-bolts around
1.
the center rack tube.
Install the clamp on the ends of the U-bolts.
2.
Align and place the center sensor (P/N 063-0130-018) over the ends of the U-bolts.
3.
Reinstall the nuts on the ends of the U-bolts.
4.
Manual No. 016-0230-116 Rev. A
Sensor Installation
23