Chapter 3
Install the Pressure and Tank Hoses
Pressure Hose Installed
FIGURE 3.
Machine's
Hydraulic Valve
Connection
AutoBoom Valve
Connection
Locate the auxiliary pressure port on the machine's hydraulic valve.
1.
Remove the plug from the auxiliary pressure port.
2.
Install a 3/4" JIC (M) to 3/4" SAE O-ring (M) straight adapter fitting (P/N 333-0012-093) in the pressure port
3.
of the machine's hydraulic valve.
Install the straight end of the supplied hydraulic hose (P/N 214-1000-999) on the installed adapter fitting.
4.
Connect the 90° end of the installed hydraulic hose to the fitting installed in Port P of the AutoBoom valve
5.
(P/N 063-0131-125).
Tank Hose Installed
FIGURE 4.
Machine's
Hydraulic Valve
Connection
AutoBoom Valve
Connection
Locate the auxiliary tank port on the machine's hydraulic valve.
6.
Remove the plug from the auxiliary tank port.
7.
Install a 3/4" JIC (M) to 7/8" SAE O-ring (M) straight adapter fitting (P/N 333-0012-056) in the tank port of
8.
the machine's hydraulic valve.
Install the straight end of the supplied hydraulic hose (P/N 214-1000-999) on the installed adapter fitting.
9.
Connect the 90° end of the installed hydraulic hose to the fitting installed in Port T of the AutoBoom valve.
10.
14
Hagie STS, Model Year 2007-2013 AutoBoom™ Installation Manual