Install the Load Sense Hose
Load Sense Hose Installed
FIGURE 13.
Machine's
Hydraulic Valve
Connection
AutoBoom Valve
Connection
Locate the auxiliary load sense port on the machine's hydraulic valve.
1.
Remove the plug from the auxiliary load sense port.
2.
Install a 3/4" JIC (M) to 3/4" SAE O-ring (M) straight adapter fitting (P/N 333-0012-045) in the load sense
3.
port of the machine's hydraulic valve.
Install the straight end of the supplied hydraulic hose (P/N 214-1001-001) on the installed adapter fitting.
4.
Connect the 90° end of the installed hydraulic hose to the fitting installed in Port LSP of the AutoBoom valve
5.
(P/N 063-0131-125).
Manual No. 016-0230-116 Rev. A
Hydraulic System Installation
19