Configuring Usb For Read-Only - Keysight X Series Manual

User and Remote Interface Security Measures
USB Interfaces
6. From the Registry Editor menu, select File > Exit to save the settings and
7. Shut down and restart the instrument, to enable the new settings to take
Microsoft AutoRun Patch
N O T E
The information in this section applies only to Windows XP. If your instrument
has a Windows 7 operating system, you do not require this patch.
There is a defect in Windows XP that compromises the ability to disable
AutoRun. This defect has been fixed by a patch from Microsoft, as described in
the
This patch has been included in new instrument shipments from the factory
since revision A.03.00.
After the patch has been applied, there will be a Registry entry at:
HKLM\Software\Microsoft\Windows\CurrentVersion\Policies\Expl
orer\HonorAutorunSetting with a default value of 1.
More Information
The following Wikipedia articles provide more information about AutoRun and
AutoPlay:
http://en.wikipedia.org/wiki/AutoRun
http://en.wikipedia.org/wiki/AutoPlay

Configuring USB for Read-only

A convenient mechanism is provided to set the instrument's USB interfaces to
read-only, thus preventing transfer of files from the instrument onto USB
devices.
You can change this setting only when you are logged on as the Administrator.
For details of how to log on to the instrument as the Administrator, see the
Keysight MXE EMI Receiver: Getting Started
the following:
1. If you are not currently logged on to the instrument as the Administrator,
2. To log off, use one of the following procedures, depending on your
Security Features & Document of Volatility
exit the editor.
effect.
Microsoft Knowledge Base Article ID:
you must log off.
If you are currently logged on to the instrument as the Administrator, and
the Keysight XSA application is already running, go to Step 4.
The log-off procedure executes more quickly if you first exit the Keysight
XSA application, but you can also log off without exiting the application.
instrument's operating system:
967715.
Guide. To change the setting, do
35