7
SD Memory Card Removal Procedure
When present, the SD Memory Card is located on the A4 Processor assembly.
However, it can only be accessed after the instrument's disk drive is removed.
To remove the SD Memory Card:
1. Remove the disk drive by following the
2. Push in on the SD Memory Card and release. The Card springs back out, and can then
Once the disk drive has been removed, the SD Memory Card is accessible.
be removed.
Figure 7-1 on page 31
Disk Drive Assembly and SD Memory Card extracted from the instrument.
Security Features and Document of Volatility
SD Memory Card Removal Procedure
"Disk Drive Removal Procedure" on page
below shows the instrument rear panel, with the
27.
30