Modifying A Phone Button Template For Pab Or Fast Dial - Cisco 8961 Administration Manual

Chapter 8 Configuring Features, Templates, Services, and Users
•
•
•
•
Click Save.
Step 4
You can add, update, or delete service parameters as needed as described in the
Services

Modifying a phone button template for PAB or Fast Dial

To modify a phone button template for PAB or Fast Dial, follow these steps:
Procedure
From Cisco Unified Communications Manager Administration, choose Device > Device Settings >
Step 1
Phone Button Template.
Click Find.
Step 2
Select the phone model.
Step 3
Click Copy, enter a name for the new template, and then click Save.
Step 4
The Phone Button Template Configuration window opens.
Identify the button you would like to assign, and select Service URL from the Features drop-down list
Step 5
box associated with the line.
Click Save to create a new phone button template using the service URL.
Step 6
Choose Device > Phone and open the Phone Configuration window for the phone.
Step 7
Select the new phone button template from the Phone Button Template drop-down list box.
Step 8
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.6 (SIP)
For PAB, enter the following URL:
http://<Unified CM-server-name>:8080/ccmpd/login.do?name=#DEVICENAME#&service=pab
For Fast Dial, enter the following URL:
http://<Unified-CM-server-name>:8080/ccmpd/login.do?name=#DEVICENAME#&service=fd
Secure Service URL
For PAB, enter the following URL:
https://<Unified CM-server-name>:8443/ccmpd/login.do?name=#DEVICENAME#&service=pab
For Fast Dial, enter the following URL:
https://<Unified-CM-server-name>:8443/ccmpd/login.do?name=#DEVICENAME#&service=fd
Service Category—Select XML Service.
Service Type—Select Directories.
Enable—Select the check box.
http://<IP_address> or https://<IP_address> (depending on the protocol supported by the Cisco
Unified IP Phone)
Configuration" chapter in the Cisco Unified Communications Manager Administration Guide.
If you change the service URL, remove an IP Phone service parameter, or change the name
Note
of a phone service parameter for a phone service to which users are subscribed, you must
click Update Subscriptions to update all currently subscribed users with the changes, or
users must resubscribe to the service to rebuild the correct URL.
Modifying Phone Button Templates
"Cisco Unified IP Phone
8-31