Hydraulic Installation - Landoll 2210 Operator's Manual

3-9 HYDRAULIC INSTALLATION

Note: Refer to Figures 3-13 through 3-16 for
wheel lift, disc gang lift, and wing fold hy-
draulic diagrams.
3-9.1 Install the manifold to the manifold
bracket on the frame using 1/2-13 x 3-1/2
hex head cap screws and hex lock nuts.
o
3-9.2 Install 90
of the manifold.
3-9.3 Install wheel lift and disc gang lift sys-
tem hoses per Figures 3-13 and 3-14.
3-9.4 Install steel plugs in any remaining open
manifold or valve ports.
adapter in port E in the rear
3-23