Hydraulic Installation (D And E Models Only) - Landoll 1550 Series Operator's Manual

Hydraulic Installation (D and E
Models Only)
1. Pin cylinder rod to wing bracket using clevis pin.
o
2. Install 90 elbow with restrictor into each port of
hydraulic cylinders (See Figure 3-6.)
3. Install Hose 1 from hydraulic manifold to the base
end of the left hydraulic cylinder.
4. Install Hose 2 from hydraulic manifold to the rod end
of the left hydraulic cylinder.
ITEM
1 1-397-010299-14
1-397-010299-10
2 1-397-010299-16
1-397-010299-02
3 1-397-010299-11
1-397-010299-24
4 1-397-010299-10
1-397-010299-02
5 1-397-010299-02
1550 SERIES HYDRAULIC HOSE
PART NUMBER
5. Install Hose 3 from hydraulic manifold to the rod end
of the right hydraulic cylinder.
6. Install Hose 4 from hydraulic manifold to the base
end of the right hydraulic cylinder.
7. Install coupling Hoses 5 from the front of the
hydraulic manifold to the 1/2 male couplers. Connect
the coupler fittings to the tractor.
8. Install o-ring plug in rear ports of hydraulic manifold.
DESCRIPTION
HOSE ASSEMBLY, 24"
HOSE ASSEMBLY, 41"
HOSE ASSEMBLY, 44"
HOSE ASSEMBLY, 60"
HOSE ASSEMBLY, 64"
HOSE ASSEMBLY, 80"
HOSE ASSEMBLY, 41"
HOSE ASSEMBLY, 60"
HOSE ASSEMBLY, 60"
ASSEMBLY INSTRUCTIONS
USED ON MODEL
D
E
D
E
D
E
D
E
D AND E
3-11