Table of Contents
Advertisement
12
Appendix
12.3
Amount of lubricants
Scope of Application
•
The lubricating volumes for MONORAIL MR are also used for AMS 3B, AMSA
3L, and AMSABS 3B.
•
The lubricating volumes for MONORAIL BM also apply for AMS 4B, AMSABS
4B, and BZ.
Lubrication with grease
Initial lubrication, amount of grease per carriage [cm3]
MR carriage
MR 25
MR 30
type
A,C,E,F
1.9
2.2
B,D,G
2.2
2.8
BM carriage
BM 15
BM 20
type
A,C,E,F,H,L
0.9
1.7
B,D,G
1.6
2.1
K,J,N,M
0.7
1.4
NOTE
•
SCHNEEBERGER recommends KP2K lubricating grease in accordance with
DIN 51825 or GP00N/GP000N liquid grease in accordance with DIN 51826.
•
The specified lubricant volumes are valid for both grease and for liquid grease.
•
During greasing, move carriages three times their length several times.
•
In the case of two lube connections per carriage, divide the specified quantity
accordingly.
•
When using GP000N liquid grease, take the installation orientation of the axis into
account (separated connections).
Lubrication with oil
Initial lubrication, amount of oil per carriage [cm3]
MR
MR 25
MR 30
Any installation
0.3
0.45
orientation
BM
BM 15
BM 20
Any installation
0.2
0.5
orientation
NOTES
•
SCHNEEBERGER recommends CLP (DIN 51517) or HLP (DIN 51524) mineral oil
with a viscosity range between ISO VG32 and ISO VG100 (DIN 51519).
•
CGLP bed track oils can be used up to ISO VG220.
General information on lubrication
•
Inject the entire oil quantity in a single impulse or in several impulses in short
succession while the carriage is being moved.
•
In the case of vertical installation of the carriage, the lube connection must be
installed in the upper front plate.
•
In the case of two lube connections per carriage, divide the specified quantity accordingly.
•
During greasing, move carriages three times their length several times.
•
Take the installation orientation of the axis into account (separated connections).
•
Where necessary carry out lubricating/cleaning strokes.
•
Lubricate prior to shutdown/recommissioning
MR 35
MR 45
MR 55
MR 65
2.9
5.5
9.1
15.5
3.8
6.9
11.2
20.2
BM 25
BM 30
BM 35
BM 45
2.8
4.7
6.6
12.6
3.5
5.8
8.1
15.6
1.9
3.3
4.7
-
MR 35
MR 45
MR 55
MR 65
0.6
0.9
1.4
2.0
BM 25
BM 30
BM 35
BM 45
0.6
0.9
1.1
1.2
MR 100
-
40
MR 100
2.3
75
Hide quick links:
Advertisement
Table of Contents
