Table of Contents
Advertisement
7
Completing installation
Fig.72
Fig.73
Fig.74
Required tool
MWH installation tool
For a description of the MWH assembly tool and its assembly, see „7.2.2 MRS/BRS
brass plugs" on page 32.
Assembly process
1.
Slide the MWH assembly tool onto the guide rail. Recommendation: Use an MRM
assembly rail for this purpose.
2.
Lay the clamping ring inside the guide rail fixing hole with the slitted surface facing
upward.
3.
Lay the plug onto the ring with the conical side facing downward.
Ensure that the plugs sit plane-parallel to the rail surface in the fixing holes.
NOTE: The clamping ring has a small recess on the inside of its upper portion that
enables the plug to align with it under light pressure.
39
Hide quick links:
Advertisement
Table of Contents
