Product Identification - Measuring System - Schneeberger MONORAIL Series Mounting Instructions

3
Product information
Fig.9
3.4 Product identification - measuring system
10
Fig.8
Multi-part cover strips
Multi-part cover strips are labelled at the butt joint with a joint indicator serial number.
This is located at the end of each strip on its underside:
1 Joint indicator serial number (consecutive for each rail set)
2 Rail line 1
3 Rail line 2
The MONORAIL AMS distance measuring system is available in five versions:
• AMSA
• AMSD
• AMSABS
• AMSABS DC
• AMSA 3L
With the exception of AMSA 3L, these are available both for Ball MONORAIL BM
and for Roller MONORAIL MR. Each distance measuring system can be identified
by its electronics housing.
The labelling on each electronics housing includes the following information:
Fig.10
Fig.11
1 Type designation
2 SCHNEEBERGER GmbH company logo
3 Address of SCHNEEBERGER GmbH (Höfen)
4 Input voltage specification
5 CE marking
An exception is the AMSA 3L measuring system. In this case the identifying label is
located directly on the read head.
Fig.12
Fig.13