Schneeberger MONORAIL Series Mounting Instructions page 11

3
Product information
Fig.5
Fig.6
Fig.7
Guide rails
Guide rails are labelled at the profile base opposite the locating side. The label consists
of the following information:
1 SCHNEEBERGER company logo
2 Type description (for order codes, see MONORAIL product catalogue)
3 Consecutive serial number
AMS guide rails with magnetic measuring scale
Guide rails with magnetic measuring scale are labelled at the profile base opposite the
measuring scale, and are also marked on the upper surface of the rail with the serial
number and a label for reference mark type.
The label is located on the same side as the measuring scale.
1 Sign for reference mark pattern (for codes, see following table)
2 Serial number
The following reference mark types are available:
Sign on rail Meaning
DC
Spacing code
Equidistant
reference mark
spacings
ABS Absolute
Matched and multi-part guide rails
Matched guide rails are marked with a consecutive serial number on the rail upper
surface. Multi-part guide rails are also marked at each butt joint using a joint numbering
system. The numbering consists of:
1 Set number (consecutive)
2 Rail line number (consecutive for each rail set)
3 Joint indicator serial number (consecutive for each line)
AMS design Order code
AMSA 3B/4B TD 50, TD 20
AMSD 3B, 4B TD 50, TD 20
AMSA 3B/4B TR 50
AMSD 3B/4B TR 50
AMSA 3L 25 TR 30
AMSA 3L 35 TR 40
AMSA 3L 45 TR 60
AMSA 3L 55 TR 105
AMSA 3L 65 TR 75
AMSABS 3B, 4B TA1
9