Table of Contents
Advertisement
9
Maintenance
Fig.113
Fig.114
Cross wipers
Checking cross wipers
Check cross wipers regularly for wear and replace where required.
Replacing cross wipers in the case of MONORAIL MR
1.
Leave carriages on the guideway.
2.
Remove the upper and lower screws.
3.
Remove front panel and accessories (where applicable) from the front plate
(can be left on the guideway).
4.
Disengage the cross wiper from the front plate and, to remove it, pull over the
guide rail while holding the front plate in place.
5.
Pull the new cross wiper onto the guide rail and press it into the front plate
(taking care with the rotation lock).
6.
Slide accessories and front panel back onto the front plate.
7.
Tighten the screws. See „12.2 Screw tightening torques" on page 73 for tightening
torques.
63
Hide quick links:
Advertisement
Table of Contents
