Table of Contents
Advertisement
6
Installation
6.6
Installation options
Fig.35
Fig.36
6.6.1 Installation option 1
Installation option 1 is applicable in cases in which locating surfaces are present for
one guide rail and for one carriage.
Fig.34
1.
Brace the reference rail (1) against the locating surface of the machine bed and
fasten with screws (see „6.3 Handling guide rails" on page 19).
2.
Adjust the opposite guide rail (2) so that it is parallel and pre-fasten it by lightly
tightening its screws.
3.
Place the mounting plate (3) on the carriage and lightly tighten its fastening
screws.
4.
Brace the mounting plate (3) against the locating surfaces on the carriages on the
secured reference rail and fasten its screws.
25
Hide quick links:
Advertisement
Table of Contents
