Schneeberger MONORAIL Series Mounting Instructions page 58

7
Completing installation
NOTE: An absent or interrupted line of lubricant is indicative of an improperly-fitting wiper.
The wiper must be exchanged if this is the case.
Metal wipers
The wipers must form an even gap around the guide rail profile and should not make
contact with the guide rail at any point. Use special metal wipers for AMS systems.
Check that the wipers are correctly positioned using a feeler gauge and by moving
the machine slide.
Bellows
Check that the bellows are correctly fitted to the adapter plate and end plate.
Ensure that the bellows are able to move freely.
Traverse the machine axis, checking that the bellows slide well along the guideway.
Check that the folds are not too strongly compressed or stretched in the slide
end positions.
56