Schneeberger MONORAIL Series Mounting Instructions page 15

4
Storage and transportation
Fig.14
Fig.15
1 Assembly rail
2 Transport rail
MONORAIL BZ
The MONORAIL BZ system is fitted with an aluminium L profile for improved
transportation safety and handling. The BZ is packaged in wooden crates together
with wooden inserts that protect the guide rails from tipping over and slippage.
All steel parts are treated with a corrosion inhibitor and packaged in VCI film.
Following successful system installation, the aluminium profile is disassembled
and can be disposed of. It is possible to arrange a return consignment for recycling
with Schneeberger GmbH on a case by case basis which may contain all installation
components where applicable.
Measuring system
ATTENTION
Risk of material damage posed by magnetic fields!
The magnetic scale of the AMS guide rails may be destroyed in the
event of direct contact with magnetic fields.
• Protect rails with integrated scale from magnetic fields.
• Do not use lifting magnets for transportation.
• Protect read heads from strong vibrations or impacts.
• Where possible, always transport read heads installed in their housing. Only
remove read heads from their housing in order to mount carriages onto guide rails.
• Always disassemble the read head before mounting carriages.
• During storage: In the case of the AMSABS measuring system, do not remove
the activation strip on the power supply on the electronics housing (see „5.7
Preparing the measuring system for installation" on page 16). Only activate the
battery during commissioning.
13