Table of Contents
Advertisement
7
Completing installation
Fig.58
Fig.59
Fig.60
34
2.
Insert MRS brass plugs (conical) with the smaller-diameter side facing down.
Insert BRS brass plugs with the recess side facing down.
Ensure that the plugs sit parallel to top surface in the fixing holes.
3.
Slide the assembly tool over the plugs and position it centrally.
4.
Slide the assembly tool until both external control holes or recesses are posi-
tioned exactly over a rail fixing hole. (Depending on the size, control holes are one
or two L4 hole spacings from the installation position.)
Ș
The stamping position has been reached.
NOTE: In order to install the plugs at the extreme end of the rail, the assembly tool
can be slid beyond the rail end.
Hide quick links:
Advertisement
Table of Contents
