Table of Contents
Advertisement
7
Completing installation
Fig.95
Fig.96
2.
Use a screwdriver to lift the cover strip a few millimetres out of the groove at one
end of the guide rail.
3.
Take hold of the strip end by hand and lift it.
4.
Insert the screwdriver laterally between the guide rail and the cover strip.
5.
Slide the screwdriver along the length of the guide rail, lifting the cover strip.
Take care not to bend or twist the strip. Do not allow the cover strip or guide rail
to become scratched.
Ș
The cover strip is freed from the groove.
6.
Uninstall the cover strip from the full length of the guide rail.
7.
Check the cover strip for damage:
a) Straighten cover strips that are slightly bent.
b) Replace cover strips that are strongly bent, twisted, scratched, or otherwise
damaged.
8.
Always replace end pieces. End pieces can become damaged during disassembly
or lose their retaining force.
47
Hide quick links:
Advertisement
Table of Contents
