EOS/ESD Specifications
The specifications shown below apply except on "Soft Ground Systems" which have
a 1 meg ohm current limiting resistance and a label placed on the power source front
panel referring to EN 100015-1.
Tip-To-Ground Resistance: Less than 2 ohms.
AC Leakage: Less than 2 millivolts RMS from 50Hz to 10MHz.
Transient Level: Less than 500mV peak, out to 100MHz.
Parts Identification
•
Power Receptacle
‚
Power Switch
ƒ
LED Display
„
Program Key
...
Scroll Up Key
General Information
†
Scroll Down Key
‡
Vacuum Port
ˆ
Controllable Pressure Port
‰
AC Power Receptacle/Fuse Holder
Š
Fuse
SS
Air Fitting
S
Earth Ground Receptacle
(230 VAC sytems only)
5