Install the Pressure Hose
Pressure Hose Installed
FIGURE 9.
Pressure Port
Locate the pressure (P) port on the machine's hydraulic valve.
1.
Remove the existing plug from port P.
2.
Install a M14 x 1.5 (M) to -6 ORFS (M) straight adapter fitting (P/N 333-0012-077) in port P.
3.
Install a -6 ORFS M/F 90° swivel elbow fitting (P/N 333-0012-065) on the installed adapter fitting.
4.
Install the 90° end of the supplied hydraulic hose (P/N 214-1000-333) to the fitting installed in Port P of the
5.
SmarTrax valve (P/N 334-0003-088).
Connect the straight end of the installed hydraulic hose on the fitting installed in port P of the machine's
6.
hydraulic valve.
Install the Tank Hose
Machines with Power Beyond Installed
Tank Hose Installed
FIGURE 10.
Remove the machine's existing tank hose from the hydraulic valve.
1.
Manual No. 016-5034-006 Rev. B
Hydraulic Installation
Tank Port
17