Install The Load Sense Hose - Raven SmarTrax Installation Manual

Install the Load Sense Hose

Machines with Power Beyond Installed
Load Sense Hoses Installed
FIGURE 13.
Load Sense
Tee Installed
John Deere
Power Beyond
Hose
Install the John Deere Power Beyond plate orifice fitting in the female end of a -6 ORFS M/M/F swivel run
1.
tee adapter fitting (P/N 333-0012-069).
Install the end of the tee fitting containing the orifice on the male end of the installed tank tee fitting.
2.
Install a -6 ORFS M/F 90° swivel elbow fitting (P/N 333-0012-065) on the straight end of the installed tee
3.
fitting.
Trace the Power Beyond hose from the Power Beyond quick coupler to the LS port of the machine's
4.
hydraulic valve.
Disconnect the Power Beyond hose from the machine's LS port.
5.
Connect the Power Beyond hose to the fitting installed in step 3.
6.
Remove the existing tee adapter fitting in the LS port.
7.
Important:
Do not remove the Power Beyond straight adapter fitting, the spacer, or the shuttle from the LS port of
the machine's hydraulic valve. These fittings are needed for the SmarTrax load sense hose installation.
Install a -6 ORFS M/F 90° swivel elbow fitting (P/N 333-0012-065) in the LS port.
8.
Install a -4 ORFS (M) to -6 SAE O-ring (M) straight adapter fitting (P/N 333-0012-195) in Port LSPV of the
9.
SmarTrax valve (P/N 334-0003-088).
Install the 90° end of the supplied hydraulic hose (P/N 214-1000-833) on the fitting installed in Port LSPV of
10.
the SmarTrax valve.
Connect the straight end of the installed hydraulic hose to the 90° end of the tee fitting installed in step 2.
11.
Install the 90° end of the supplied hydraulic hose (P/N 214-1000-833) on the fitting installed in Port LS
12.
STEER of the SmarTrax valve.
Connect the straight end of the installed hydraulic hose to the fitting installed in the machine's LS port.
13.
Manual No. 016-5034-006 Rev. B
Hydraulic Installation
Load Sense
Port
Tank Tee Fitting
Installed
John Deere
Power Beyond
Orifice Fitting
19