Install The Left And Right Steering Hoses - Raven SmarTrax Installation Manual

Chapter 3

Install the Left and Right Steering Hoses

Left and Right Steering Hose Connections on the SCU
FIGURE 8.
Right Steering
Hose Connection
Locate the machine's left and right steering hoses on the SCU.
1.
Disconnect the left steering hose from the steel line.
2.
Install a -8 ORFS M/M/F swivel run tee adapter fitting (P/N 333-0012-028) on the end of the steel line.
3.
Connect the machine's left steering hose to the opposite end of the installed tee fitting.
4.
Install a -8 ORFS M/F 90° elbow fitting (P/N 333-0012-067) on the 90° end of the installed tee fitting.
5.
Install the straight end of the supplied hydraulic hose (P/N 214-1000-759) on the installed elbow fitting.
6.
Route the installed hydraulic hose under the left side of the cab, behind the fender well.
7.
Connect the 90° end of the installed hydraulic hose to the fitting installed in Port A of the SmarTrax valve
8.
(P/N 334-0003-088).
Disconnect the right steering hose from the steel line.
9.
Install a -8 ORFS M/M/F swivel run tee adapter fitting (P/N 333-0012-028) on the end of the steel line.
10.
Connect the machine's right steering hose to the opposite end of the installed tee fitting.
11.
Install a -8 ORFS M/F 90° elbow fitting (P/N 333-0012-067) on the 90° end of the installed tee fitting.
12.
Install the straight end of the supplied hydraulic hose (P/N 214-1000-759) on the installed elbow fitting.
13.
Route the installed hydraulic hose under the left side of the cab behind the fender well.
14.
Connect the 90° end of the installed hydraulic hose to the fitting installed in Port B of the SmarTrax valve.
15.
Reinstall the SCU shield.
16.
16 John Deere 8X00/8X10 Series SmarTrax™ Installation Manual
Left Steering Hose
Connection