Interbus 2Mbit/S Foc; Foc Connection Interbus 2Mbit/S - Leuze electronic DDLS 200 Series Original Operating Instructions

INTERBUS 2MBit/s FOC

7 INTERBUS 2MBit/s FOC
The INTERBUS fiber-optic cable model of the DDLS 200 has the following features:
• Operating ranges 200m, 300m
• Transmission immune to interference through the use of fiber optic cables
• Bus connection by means of polymer-fiber cable with FSMA connector
• The DDLS 200 is an INTERBUS participant (Ident code: 0x0C = 12
but does not occupy data in the bus
• Adjustable transmission rate 500 kBit/s or 2 MBit/s
• Cascading of several DDLS 200 is possible (see Chapter 4.3)
7.1

FOC connection INTERBUS 2MBit/s

The connection to the INTERBUS is by means of the FSMA connectors H1 and H2 as shown in
Figure 7.1.
Recommended fiber-optic cables:
• PSM-LWL-KDHEAVY... (Phoenix Contact)
• PSM-LWL-RUGGED... (Phoenix Contact)
NOTE
The maximum length of the fiber-optic cables is 50m.
28 DDLS 200
),
dec
Leuze electronic