Devicenet / Canopen; Electrical Connection Devicenet/Canopen - Screwed Cable Glands/Terminals - Leuze electronic DDLS 200 Series Original Operating Instructions

9

DeviceNet / CANopen

The DeviceNet/CANopen model of the DDLS 200 has the following features:
• Operating ranges 120m, 200m, 300m
• The DDLS200/___.-50 can transmit both DeviceNet as well as CANopen protocols
• Electrically isolated interface
• The DDLS 200 does not occupy an address
• CAN controller acc. to 2.0B standard
• Can simultaneously process 11-bit and 29-bit identifiers
• 8 adjustable baud rates (10, 20, 50, 125, 250, 500, 800kBit/s, 1MBit/s)
• Baud rate conversion possible
• With DDLS 200 it is possible to extend the overall size of a CAN network
• M12 connector set available as accessory
• Various supply options are possible for the device
• Cascading of several DDLS 200 is possible (see Chapter 4.3)
9.1

Electrical connection DeviceNet/CANopen - screwed cable glands/terminals

The electrical connection to DeviceNet / CANopen is made at terminals V-, CAN_L, DRAIN, CAN_H,
V+. The terminals are each available twice for wiring through the bus.
Leuze electronic DDLS 200
DeviceNet / CANopen
35